Fiberglass Cord
Industrial Timing Belts

Our fiberglass cord industrial timing belts are engineered around a single priority: dimensional stability. Reinforced with continuous E-glass fiber cords that exhibit near-zero elongation under load, these belts hold precise pitch length over millions of cycles — essential for indexing tables, registration drives, and positioning systems where even a fraction of a millimeter of stretch causes cumulative error.

Material & Construction

Each belt is built around continuous E-glass fiberglass cords, chosen for their exceptionally high tensile modulus and minimal creep under sustained tension — properties that steel cord cannot match at comparable weight, and that aramid fiber falls short of under long-duration static loads. The glass cords are impregnated with a bonding resin and embedded in a neoprene or polyurethane matrix that prevents cord-to-cord slippage and maintains consistent pitch spacing across the belt's full length.

Design & Performance

Because fiberglass cord essentially does not stretch under normal operating tension, belts retain their as-molded pitch length far longer than aramid or rubber-cord alternatives, directly translating into tighter registration accuracy and less need for periodic re-tensioning. The lightweight construction also reduces rotating mass in high-cycle indexing applications, lowering inertia and improving positioning repeatability.

Manufacturing Excellence

Belts are produced under ISO 9001 controls with cord tension monitored continuously during the winding process to guarantee uniform pitch accuracy. Finished belts are measured on a laser pitch-line scanner, and a sample from every batch is subjected to a 500,000-cycle creep test to confirm elongation remains within ±0.02% of nominal length.

Customization & Flexibility

We produce fiberglass-cord belts in fine pitches down to 2mm and custom widths for compact indexing mechanisms, as well as longer-pitch variants for larger registration drives. Belts can be supplied with precision-ground edges or notched backs for specific encoder or sensor requirements.

Applications Across Industries

Our fiberglass cord industrial timing belts are deployed in:

• CNC Indexing Tables – repeatable rotary and linear positioning.
• Printing Registration – color-to-color alignment drives.
• Elevators – door operator and cab positioning drives.
• Textile Machinery – warp and take-up synchronization.
• Laboratory Automation – precision sample handling stages.
• Office Equipment – large-format plotter and scanner drives.

When a stretched belt means a misregistered print or a misaligned index, fiberglass cord construction is the difference between acceptable and unacceptable results. Precision that holds, cycle after cycle.